Ottawa Garage Door > Tips

Garage Door Tips

The garage door is typically the largest moving object in your home. Properly maintained and operated, a garage door and its operating system allow you, your family and your vehicles convenient access to and from your home. They also provide security and protect against the elements. Newer, insulated garage doors even help save energy. But moving garage doors can also cause serious injury, or even death. While there are some garage door system maintenance chores that you yourself can – and should – perform on a regular basis, there are other tasks (including garage door installation and garage door spring replacement) that are best left to the pros. If you have children, you should also take some time to teach them that the garage door and its operating system are not playthings. Please take some time to browse Garage Door Care. We’ll do our best to answer your questions and help you learn about your garage door and its operating system and maintenance of both so that they can provide years of service. We’ll teach you how to perform some routine maintenance chores, and we’ll explain why others need the touch of a seasoned pro. And we’ll outline garage door safety for both young and old.   1. Look and Listen The most important preventive step you can take is to observe your garage door in action every time you use it. Is it moving smoothly or is it jerky in places? Does it operate silently or does it make grinding or scraping noises? Do both sides of the system (springs, pulleys and cables) look symmetrical?   2. Tighten up the Hardware The average garage door moves up and down more than a thousand times a year. That’s a lot of movement and vibration, which can loosen the hardware. Examine and tighten all roller brackets and bolts with a socket wrench.   3. Test the Garage Door Balance If your garage door is not properly balanced, the garage door opener will have to work harder, and it won’t last as long. After you disconnect the opener by pulling the release handle (usually a red cord), manually move the door about halfway up. If it doesn’t stay put, the counterweight system (springs) are improperly balanced. Garage door spring adjustment is best left to the professionals.   4. Inspect and Replace the Rollers The rollers, whether steel or nylon, need to be inspected twice a year and replaced every seven years or so, and even more if you use your garage door many times a day. Worn, chipped or cracked rollers should be replaced as soon as possible. You do this by removing and reinstalling any roller brackets that are not directly attached to the cable system.   5. Replace the Weatherstripping If the rubber weather seal strip on the bottom of your door is brittle or cracked, replace it right away to keep the elements out of your house. Weatherstripping is sold by the foot at hardware and home improvement stores. Just cut to size and insert into the grooves with the wide angle of the flange inside the door.   6. Lubricate the Moving Parts Keeping your garage door parts greased up will add years of seamless operation to your system – and it takes just 10 minutes a year! Use white lithium grease on the opener’s chain or screw, and a spray lubricant, available from your garage door specialist, to coat the overhead springs.   7. Check the Cables You should never tinker with the high-tension cables that lift your door because they have enough force to maim and kill. But you can check their condition so you know when to hire a pro. Check for broken strands and damage near the bottom roller bracket.   8. Test the Auto-Reverse Safety Features There are two mechanisms: mechanical and photocell. In order to test the mechanical feature, place a piece of wood or a brick on the ground in the path of the door. When the door coming down touches that object, it should reverse direction and go back up again. To test the second, the photoelectric system with beams at each side, close your door and just pass your leg in the door’s path. Your door should reverse. If your opener is more than 20 years old, it may lack this basic safety features – and so it’s time to buy a new garage door opener.   9. Clear the Tracks Make sure the tracks on either side of the door are free from debris and, if you are so inclined, you can use a level to check the plumb. Any major adjustments to tracks must be done by a professional garage door technician.   10. Groom Your Garage Door Don’t forget to examine the door itself. Wood doors will need to be checked for water damage and warp, as well as chipped and peeling paint. Steel doors may have rust spots that need to be sanded, primed and painted. Wash your garage door regularly with a mild all-purpose cleaner at the same time you do your car.    
Call Now Button